Ceramic Coating Product List and Ranking from 29 Manufacturers, Suppliers and Companies

Suppresses delamination from beneath the ceramic coating! 【Fine Coating HD】

This is a groundbreaking ceramic coating that combines newly developed substrate reinforcement with an optimized fine coating VC.

Fine Coating HD (hybrid diffusion) is a revolutionary ceramic coating that combines newly developed substrate reinforcement with an optimized fine coating VC. This treatment significantly improves adhesion to suppress delamination from beneath the ceramic film that occurs during the press processing of high-tensile steel plates. 【Features】 ■ Film type: VC (Vanadium Carbide) ■ Film hardness: HV3000 ■ Film thickness: 7~15μm ■ Substrate reinforcement layer hardness: 60~64HRC ■ Substrate reinforcement layer thickness: 0.5~2.0mm (depending on material and application) 【Applicable materials】 ■ Tool steel for molds (equivalent to SKD11) ■ High-speed steel (equivalent to SKH51) ■ Martensitic stainless steel ■ Alloy tool steel *For more details, please download the materials or contact us.

Company：ケンテック
Price：Other

Special Steel
Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic coating

Introduction of coatings suitable for applications such as non-stick, heat resistance, wear resistance, high hardness, and chemical resistance!

" Ceramic coating" is a coating that uses fine ceramics as raw materials and employs sol-gel composite material technology. It has strong adhesion due to the chemical bonding with silica polymers generated by dehydration and shrinkage polymerization, preventing the progression of corrosion even when exposed to corrosive environments at the interface between the substrate and the coating film. Additionally, because it is tightly bonded to the substrate through chemical bonding, it does not experience delamination or blistering due to penetration like fluoropolymer coatings. 【Features】 ■ Heat resistance: Capable of withstanding high temperatures of 450°C ■ Wear resistance: Hard with a pencil hardness of 9H, resistant to scratching ■ Non-stick properties: Equivalent to fluoropolymer coatings (PTFE, PFA, etc.) ■ Steam resistance: Strong against steam, with excellent adhesion that makes delamination difficult ■ Thermal conductivity: Good thermal conductivity, further enhanced by far-infrared radiation ■ Safety: No harmful gas generation even when temperatures rise excessively *For more details, please refer to the related link page or feel free to contact us.

Company：ハギテック本社工場
Price：Other

Other surface treatment equipment
Surface treatment contract service
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Non-stick property on metal surfaces = Prevention of dirt on photomasks

When FluoroSurf FG-5093 is applied to a metal surface, it becomes a non-stick surface, preventing dirt and adhesives from adhering. Samples are currently available for corporate clients only.

When FluoroSurf FG-5093 is applied to metal, it imparts non-stick properties to the surface. Non-stick means that tape, adhesives, and other contaminants are less likely to adhere and are easy to remove. When applied to semiconductor photomasks with a 1:1 scale, it becomes less likely for contaminants from photoresist to adhere. Moreover, this property is durable, allowing it to maintain its performance over a long period. Additionally, the coating film is an extremely thin layer of about 10 nanometers, so it does not cause any issues even if it adheres to the mask openings. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine allows for easy removal of contaminants ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ If the effect diminishes, simple reapplication restores performance Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other polymer materials
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic coating

Over three times the wear resistance of hard chrome plating! We will propose materials and processing methods that meet our customers' needs.

The characteristics of ceramics include high hardness, low friction, and non-combustibility, among various applications. Our company proposes materials and processing methods that meet our customers' needs. The coating technology known as "chemical densification," which is one type of "ceramic coating," forms an intermediate layer through a chemical bond created by the mutual diffusion of Cr in the coating and Fe in the substrate, resulting in extremely high adhesion. Additionally, the high hardness ranges from 1500 to 2000 Vickers, and the porosity is close to zero, preventing the ingress of corrosive liquids and gases. 【Properties】 ■ High hardness: 1500 to 2000 Vickers ■ Non-porous: Nearly zero porosity prevents the ingress of corrosive liquids and gases ■ Wear resistance: Over three times the wear resistance of hard chrome plating ■ Electrical insulation: 1 to 10 x 10^Ω/cm *For more details, please refer to the PDF document or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic coating [Sample available]

Even complex structures up to 1 meter in size can be fully coated! *Case-specific coating examples are currently being offered.

Narasaki Industries has developed a ceramic DIP coating that achieves an incredibly precise control of film thickness. This allows for a greater degree of freedom in ceramic coatings for many materials. 【Four Features】 ◆ High freedom of shape, capable of coating 3D shapes at meter scale ◆ Applicable to most high-functionality materials ◆ Capable of an average thick film of 50μ ◆ Excellent surface roughness and smoothness (Ra 0.8 or lower) 【Materials that can be coated】 ■ Fine ceramics (alumina, zirconia, aluminum nitride, etc.) ■ Heat-resistant glass such as quartz glass ■ Graphite, high melting point metals *Please download and view our coating case collection. We optimize using composite ceramic films according to your application. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Processing Contract
Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for extending the lifespan of the multi-light setter! New method of ceramic coating!

We propose extending the lifespan of setters, which are essential consumable components in the sintering process of electronic parts! We are expanding inquiries under the theme of 'SDGs' with consideration for the Earth!

Narasaki Industries has developed a ceramic coating that achieves incredibly precise film thickness control. Its name is "Ceramic Dip Coating." As the name suggests, the workpiece is dipped into a ceramic slurry to form a film. This allows for a more flexible ceramic coating applicable to a wide variety of materials and shapes. 【Features】 ◆ High freedom of shape, capable of coating 3D shapes on a meter scale ◆ Coating possible on almost all ceramic substrates ◆ Average thickness of 50μm achievable ◆ Excellent thermal shock resistance with a film having a pore diameter of 0.1μm and a porosity of 30-40% ◆ Good surface roughness of the coating with excellent smoothness (Ra below 0.8) 【Materials that can be coated】 ■ Mullite ■ Alumina-based ■ Porous and dense materials used for setters, etc. *Please download and view the coating case collection. We utilize composite ceramic films tailored to your applications to achieve optimization. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Ceramic Coating with Excellent Non-Stick and Wear Resistance

There are cases where, after several months of use, there is no degradation in performance, and cleaning tasks have become significantly easier than before.

This is a case study from a food company. They were struggling with the burden of cleaning due to product adhesion on the molds and transport guides used in the manufacturing process. Among several surface treatment options we proposed, they showed interest in a ceramic coating that excels in heat resistance and non-stick properties. After conducting a test evaluation, we achieved good results in terms of non-stick performance. As a result, even after several months of use, there was no degradation in performance, and they were pleased to find that cleaning tasks had become significantly easier than before. [Issues] - Excessive material adhesion can lead to defects where products do not meet the specified weight. - They had previously adopted fluoropolymer coatings, but these wore out quickly, resulting in low cost-effectiveness. *For more details, please refer to the PDF document or feel free to contact us.*

Company：蒲田工業
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japan ITF Corporation Ceramic Coating

Utilizing our technological expertise, experience, and know-how as a pioneer in ceramic coating, we provide comprehensive engineering and coating solutions for ceramic coatings, taking into account the purpose, shape, material, and other factors, to meet our customers' diverse needs.

Company：日本アイ・ティ・エフ
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance surface treatment ceramic coating

Achieving high hardness with a thin film coating of 0.5 to 5 μm. Ideal for improving wear resistance of cutting tools and similar applications.

Our high-performance surface treatment, ceramic coating, achieves high hardness with a thin film coating of 0.5 to 5 μm. It is ideal for improving the wear resistance of cutting tools and molds. Additionally, we offer a wide range of coatings and the latest high-performance coatings, with proven processing results for non-ferrous materials such as ceramics and aluminum. For more details, please contact us or download the catalog.

Company：日本エムティ
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry Surface "Polyimide Coating"

We offer two types: one with excellent insulation properties and heat resistance, and another with excellent thermal insulation properties.

"Polyimide coating" is a dry lubrication coating that offers heat resistance and insulation. There are two types: "Type ST," which excels in insulation properties, heat resistance, and wear resistance, and "Type BP," which has excellent heat resistance and insulation properties due to its porous structure. "Type ST" has excellent chemical resistance against organic solvents, gasoline, automotive oils, alkalis, acids, and more. "Type BP" features breathability and liquid permeability, providing outstanding insulation due to its porous nature. [Features] ■ Supports high-temperature processes up to 500°C (Type ST) ■ Highest level of mechanical properties among polymers (Type ST) ■ Thermal expansion is close to that of metals, providing excellent adhesion (Type ST) ■ Excellent heat resistance (approximately 300°C) (Type BP) *For more details, please refer to the PDF document or feel free to contact us.

Company：日本エムティ
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slip-enhancing coating "S-V Coat"

Improving the slip properties of various products! A coating aimed at enhancing slip properties in areas where DLC could not be applied.

The "S-V Coat," a film that improves sliding properties, targets areas where DLC (diamond-like carbon) has not been able to provide adequate sliding performance until now. We propose this film as an alternative to DLC for components in environments where continuous repeat use has been difficult due to issues with peeling and heat resistance, while you have been using DLC for the purpose of improving sliding properties. 【Features】 ■ Reduction of friction due to special surface shape effects ■ Improved sliding properties for solid materials such as glass, non-ferrous metals, and plastics ■ Excellent wear resistance with a film hardness of HV3000-3500 ■ Durability surpassing conventional non-stick coatings and DLC ■ Excellent oxidation resistance characteristics ■ Oxidation start temperature of 1100°C, suitable for environments where DLC could not be used

Company：ツール・テック東北
Price：Other

Other surface treatment equipment
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface modification Jcoat (CrN) ceramic coating

Exhibits performance with excellent mechanical properties.

PVD - The 'CrN Ceramic Coating' using ion plating is a new surface treatment technology that combines the properties of ceramics, which have high hardness and excellent wear resistance, with additional characteristics such as anti-seizing, corrosion resistance, and high-temperature oxidation resistance. It demonstrates excellent properties not only in terms of wear resistance at room temperature or in the atmosphere but also under high temperatures or corrosive environments. 【Features】 ○ Excellent anti-seizing properties, suitable for preventing galling ○ Exhibits superior corrosion resistance ○ Possesses high-temperature oxidation resistance, preventing surface degradation ○ Excellent lubricity, suitable for sliding parts, etc. ○ Ideal for press molds and similar applications ○ Thick film treatment (5-20 μm) is possible ○ Patent No. 2004785 *For more details, please download the PDF or feel free to contact us.

Company：日本コーティングセンター（ＪＣＣ）
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface modification Jcoat ACC/ACT ceramic coating

Demonstrates superior performance with more stringent corrosion resistance measures.

Coating is performed at temperatures suitable for the treated material over a wide temperature range. The deformation and alteration of the treated material due to heat are extremely small, and "ACT" exhibits wear resistance, corrosion resistance, oxidation resistance, and anti-seizing properties, while "ACC" is particularly excellent in corrosion resistance, demonstrating outstanding performance even in harsher corrosive environments. 【Features】 ○ Superior coating for more severe corrosion conditions ○ "ACC" significantly suppresses the occurrence of pitting corrosion ○ "ACT" is also suitable for cavitation and erosion prevention ○ High coating characteristics and adhesion ○ Coating at temperatures suitable for the treated material over a wide temperature range *For more details, please download the PDF or feel free to contact us.

Company：日本コーティングセンター（ＪＣＣ）
Price：Other

Surface treatment contract service
Other cutting tools
Other molds
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface modification Jcoat (TiAlN) ceramic coating

Exhibits excellent performance with superior thermal characteristics.

JCC's "TiAlN ceramic coating film" is formed through a unique PVD ion plating special process, featuring high heat resistance and oxidation resistance, and has received high praise for high-speed cutting of hard materials or dry cutting. Furthermore, due to its properties such as heat resistance and color tone, its application range has expanded to aluminum die-cast molds and machine parts. 【Features】 - High hardness and excellent heat resistance coating - Suitable for coating carbide cutting tools - Suitable for cutting heat-treated materials (40-63 HRC) and high-viscosity materials - Suitable for cutting non-ferrous metals such as aluminum alloys - Suitable for machine parts and molds that utilize properties such as heat resistance and color tone *For more details, please download the PDF or feel free to contact us.

Company：日本コーティングセンター（ＪＣＣ）
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical document "Basics of Coating" *Selection materials and applications are available for free!

What kind of products can be coated? A clear explanation is provided. Answers to everyday casual "huh?" questions are also included. Free selection materials for coatings are also offered.

This document introduces the basics of coating. It includes information on what coating is and selection materials for coating. In the Q&A section, we answer questions such as "What products can be coated?" as well as "What specific products are treated?" and "Can it be done on aluminum and brass?" 【Contents】 ■ What is coating? ■ Coating selection materials ■ Coating Q&A *For more details, please refer to the PDF document or feel free to contact us.

Company：日本コーティングセンター（ＪＣＣ）
Price：Other

Surface treatment contract service
Coating Agent
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low-temperature treatment below 350℃ is possible. Coating 'ELIPcoat'.

Cutting-edge technology: Into the semiconductor manufacturing field! Exceptional plasma etching resistance and heat & electrical properties.

"ELIPcoat" is a coating developed using JCC's PVD technology. Oxide and carbide ceramic coatings are formed with a dense crystal structure. The resulting coating imparts chemical and physical properties such as electrical characteristics and heat resistance. The differences in crystal grain size are clear, which affects particle size. Additionally, temperature adjustments can be made to suit the treated material. 【Features】 ■ Low-temperature processing is possible (below 350°C) ■ Treatment of insulators and resins is also possible ■ Oxide and carbide ceramic coatings *For more details, please refer to the PDF document or feel free to contact us.

Company：日本コーティングセンター（ＪＣＣ）
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"HiCoat γ" triples the lifespan of tools such as hob and cutter.

Achieving a remarkable increase in lifespan compared to conventional TiN and AlCrN coatings!

The ICS coating contributes to reducing maintenance labor for equipment. ■Features of Hi-Coat γ - High hardness - Low friction - High adhesion - Significant reduction in surface roughness - Heat resistance over 1000℃ The lifespan of hobs, pinion cutters, etc., is improved by about three times! The catalog also contains comparative data on the characteristics of other surface treatments. For more details, please download the materials or contact us.

Company：アイ・シイ・エス
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Coating for Gear Processing Tools

The durability of tools for gear processing has improved by approximately three times【Hi-coatγ】.

Coating for Gear Processing Tools [Hi-coatγ] [Background for Introduction] Extending the lifespan of tools for gear component processing is a challenge. [Solution] Proposed our Hicoatγ coating for bob cutters. [Effect] Achieved approximately three times the durability compared to the conventional AlCrN coating. *There are also materials not available online. For more details, please download the PDF or feel free to contact us. *Case study materials can be downloaded from the catalog of the I.C.S. case study collection.

Company：アイ・シイ・エス
Price：Other

gear
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chip resistance, wear resistance, sliding properties 'OS-C2' (noted as CII)

Excellent chip resistance and wear resistance, strong in low-speed cutting: [Heat-resistant molds] [Dry processing tools (for low hardness materials)] [Low-speed cutting of low hardness materials]

OS-C2 (officially referred to as CII) is an improved ceramic coating created by adding silicon to chromium nitride (CrN). —————————————————————— 【Features】 ■ Excellent resistance to adhesion and wear, making it ideal for cutting Ni and Cu alloys, as well as for low-speed machining tools and general machining of iron-based raw materials with low-speed and large cuts. ■ Suitable for both wet machining and high-speed dry machining. 【Examples of Applications】 ■ Tools for dry machining (low hardness materials) ■ Low-speed cutting of low hardness materials with HRC 40 or lower ■ Heat-resistant molds, etc. *For detailed specifications, please refer to the catalog or the product information on the official website.

Company：オンワード技研本社
Price：Other

Surface treatment contract service
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thin film coating specification of OS-T 'SmArc OS-T'

Optimal for small diameter tools and molds with a film thickness of 0.5μm【Mold】【Small Diameter Tools】【Small Diameter Reamers】【Heat-Treated Steel Processing】

SmArc OS-T is an improved ceramic coating with a titanium silicon nitride coating (OS-T) applied as a thin film. (This coating is done under specific conditions targeting 0.5 microns on our test pieces.) —————————————————————— 【Features】 ■ Compared to the standard film thickness (2μm) of OS-T, the film quality has been enhanced. 【Examples of Applications】 ■ Tools and molds with strict dimensional tolerances ■ Small diameter tools ■ Small diameter reamers ■ Small diameter end mills ■ Hardened steel machining, etc. *For detailed specifications, please refer to the catalog or the product information on the official website.

Company：オンワード技研本社
Price：Other

Surface treatment contract service
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thin film specification of OS-VII 'SmArc OS-VII (seven)'

Optimal for small diameter tools and molds with a film thickness of 0.5μm【molds】【small diameter tools】【small diameter reamers】【small diameter end mills】【copper processing small diameter punches】

SmArc OS-VII is an improved ceramic coating with a thin film of aluminum chromium nitride coating (OS-VII). (This coating is applied under specific conditions targeting a thickness of 0.5 microns on our test pieces.) —————————————————————— 【Features】 ■ Compared to the standard film thickness (2μm) of OS-VII, the film quality has improved. ■ Coating can be applied without compromising the shape of the base material for small diameter tools and molds, which are affected by film thickness. ■ There are proven results with small diameter reamers used in stainless steel precision machining and small diameter punches for copper processing. 【Examples of Applications】 ■ Tools and molds with strict dimensional tolerances ■ Small diameter tools ■ Small diameter reamers ■ Small diameter end mills ■ Small diameter punches for copper processing, etc. *For detailed specifications, please refer to the catalog or the official product information on the website.

Company：オンワード技研本社
Price：Other

Surface treatment contract service
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

<New Product> [For Difficult-to-Cut Materials] Ceramic Coating OS-Z

[For difficult-to-cut materials] Cutting under high temperature and harsh conditions 【High-speed machining tools】【Iron-based processing punches】【General steel material tools】【Dry/MQL processing of Inconel and others】

【Features】 ■ OS-Z is the world's first mass-produced acid-nitrided aluminum-chromium multilayer coating, created by adding oxygen to our product OS-VII, which is a nitride aluminum-chromium multilayer coating. ■ By using an acid-nitrided coating, it enhances heat resistance while maintaining versatility, demonstrating effectiveness in high-temperature and harsh conditions compared to OS-VII. 【Examples of Applications】 ■ High-speed machining tools ■ Iron-based machining punches ■ General steel material tools ■ Dry/MQL machining of difficult-to-cut materials (such as Inconel), etc. * For detailed specifications, please refer to the catalog or the product information on the official website.

Company：オンワード技研本社
Price：Other

Processing Contract
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PVD ceramic coating TiALN

TiAlN ceramic coating that breaks the common sense of cutting tools.

TiAlN ceramic coating forms a film with high hardness and excellent heat resistance. It is suitable for coating carbide tools and for coating molds and machine parts that require heat and wear resistance.

Company：タイヘイテクノサービス
Price：Other

Ceramics
Other metal materials
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PVD Ceramic Coating Prime Coat-C

Ceramic coating with excellent weldability prevention during soft steel processing.

A super lubricating film that far exceeds conventional wisdom. With the new composition film, we have successfully added high lubrication performance while maintaining heat resistance comparable to TiAlN. It prevents edge welding of the material in soft steel processing, demonstrating smooth and beautiful cutting performance.

Company：タイヘイテクノサービス
Price：Other

Ceramics
Other metal materials
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CVD ceramic coating TiC/TiCN/TiN

Ceramic coating that withstands harsh conditions.

The CVD method (Chemical Vapor Deposition) is a process that supplies various compounds in gas form to a high-temperature furnace, chemically coating the surface of the treated material with ultra-hard ceramic compounds. By using thermal chemical vapor deposition, various functional ceramic films are coated in single or multiple layers at high temperatures (900 to 1100°C), significantly enhancing the performance of the material with the resulting high hardness and high adhesion ceramic films.

Company：タイヘイテクノサービス
Price：Other

Ceramics
Other metal materials
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eliminate peeling and chipping! New technology [Room Temperature Dry Ceramic Coating]

I want to be free from claims of peeling and chipping! I want to improve performance! Would you consider alternative technologies to DLC and ceramic thermal spraying?

Appeal Points of Alternative Technology [ERIN] ◆ No chipping or peeling upon impact! ◆ Film formation technology at room temperature, with no thermal stress! ◆ Higher adhesion compared to DLC, resulting in fewer pinholes and cracks! ◆ Completely chrome-free, with no environmentally harmful substances used in raw materials or processing! ◆ Thin film with high hardness! (Film thickness 1-6μm / Hardness HV1000-1400) We will listen to your current concerns and provide proposals and estimates. Please feel free to contact us.

Company：豊実精工
Price：Other

Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft's 【Sera Armor】 (Ceramic Coating)

Shine Craft's next-generation coating, environmentally friendly and contributing to a wide range of industries from cooking utensils to industrial equipment!

Ceramic Armor Coating is a ceramic coating developed by Shine Craft. It is an environmentally friendly coating that is non-toxic and harmless, made from high-purity natural inorganic minerals (ceramics) using a liquid inorganic ceramic coating material manufactured based on the sol-gel process. It excels in release properties, heat resistance, and abrasion resistance, and is effective for household and commercial cooking utensils, as well as various food and industrial manufacturing equipment. ◆ Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick properties, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating purposes.

Company：シャイン工芸
Price：Other

Processing Contract
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft: Features of Cerarmor (Ceramic Coating)

Shine Craft's ceramic armor coating solves all issues related to release properties, heat resistance, and wear resistance at once!

The Sera Armor Coating film has obtained not only compliance with the Food Sanitation Act but also FDA approval in the United States! It is a non-toxic and harmless coating material that achieves a high hardness coating (pencil hardness 5 to 9H), heat resistance (continuous use at 500°C), and release properties equivalent to fluororesin, while also exhibiting far-infrared and antibacterial effects! Additionally, since the firing temperature can be low, it not only reduces the load on metal materials but can also be widely used on non-ferrous materials such as glass and plastics. ◆ Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Processing Contract
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine's "Ceramic Coating for Food Processing Equipment"

Attention those troubled by product stagnation and residue attachment on food processing lines! Shine will provide a solution.

We are distributing case studies on food processing equipment using the ceramic coating "Sera Armor"! We solve issues such as product stagnation on the production line and the hassle of cleaning due to residue adhesion! 【Ideal for customers like these!】 ◎ Products stick together and cause stagnation on the line... ◎ Residue adheres, making post-operation cleaning cumbersome... ◎ The fluorine coating wears off quickly, requiring re-coating... 【Contents included】 ◆ Customer's concerns ◆ Proposal from Shine Kogei ◆ What solutions were achieved ◆ Regarding inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Non-ferrous metals
Surface treatment contract service
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating Product List and Ranking from 29 Manufacturers, Suppliers and Companies | IPROS GMS

Ceramic Coating Manufacturer, Suppliers and Company Rankings

Ceramic Coating Product ranking